Item: ST XTA coilover kit
Vehicle: Mercedes-Benz CLA, (117)
Version: All-wheel drive, for vehicles without electronic damper control
Year of manufacture: 04/2013-
Axle load: (kg)
VA: -1140
HA: -1010
Lowering VA: 20-40
Lowering HA: 15-30
Item No. 18225867
Note:
241 ST Suspensions develops the ST XTA coilovers for particularly sporty drivers. With the adjustable damper setup from KW technology and the adjustable aluminum Unibal support bearings, the driving behavior can be extensively tuned. The highlight of this version are the aluminum Unibal support bearings, through which the camber and also the caster can be adjusted. Thanks to the adjustable damping characteristics, ST XTA coilovers make it possible to further fine-tune the damper setup individually. The damping technology used comes from KW. It allows the ST XTA coilovers to be adjusted tighter or more comfortable depending on the driver's wishes. The dampers are tuned at the upper end of the chrome-plated piston rod. If the tractive force is increased, the car drives even more smoothly and the body movements are reduced. If a more comfortable damper setting is required, the adjustment is also made via the rebound adjustment. The adjustable dampers also make it possible to change to a different rim size. But even in the basic damper setting, a vehicle with an ST Like KW, ST Suspensions also uses a polyamide adjustment spring plate, which allows the lowering to be easily adjusted via the trapezoidal thread on the galvanized shock absorber. Changing the lowering is also possible when installed by simply turning the adjustment spring plate higher or lower. If the car has a non-wheel-guiding double wishbone suspension on the rear axle, the lowering is adjusted using the ST Suspensions rear axle height adjustment. For your information: the lowering is different for every vehicle depending on the design. For example, while older vehicle models such as the Honda Civic (EJ9) can be lowered between 40 - 75 mm with the ST exclusively for ST suspensionsThe high-quality ST XTA coilovers are based on the two-tube damping principle in low-friction and pressure-resistant damper housings. The dampers are manufactured directly at KW. A monoblock guide and seal package in the damper reduces friction when the chrome-plated piston rod is inserted and removed. In addition, optimal corrosion protection and multiple sealing of the galvanized shock absorber ensure long driving fun with the ST XA coilovers. Latest damping technology for a long service life. Reduced system friction for effective adjustment of the damping Thread adjustmentGalvanized threaded spring legs with additional sealing for optimized corrosion protectionComplete solution with adjustment spring plate, racing spring system and stop elements with dust protection systemAluminum Unibal support bearing (if technically possible, adjustable)Scaled camber adjustment (also optionally caster)The damping characteristics can be adjusted from the outside